NOVATOP ALTHOLZ: 3-layer solid wood panel with a one-sided covering layer made of old wood

Types of surfaces: 1A, 4A, 4B, 4C (Quality sample book)
Type of wood: spruce
Thickness (mm): 19
Widths (mm): 1,250
Lengths (mm):  2,600, 2,800, 3,000, 3,200
Moisture of wood: 8 %
Glue: PVAc
Composition: 3-layers, middle layer – spruce, one surface layer – old wood, the other surface layer – spruce
Width of the covering lamellas: 80-230 mm always a combination of various widths of lamellas on the visual layer
Thickness of the covering lamellas: approx. 6 mm, may, depending on the board type, show a higher tolerance

Types of panels:
4 old sunburnt boards, or boards from formwork, manually brushed
1 beams and boards from a roof truss, manually brushed (Warning: only length 3,200 mm)

4A colour shade – black, dark brown, sometimes nail holes, places repaired with old wood
4B colour shade – dark brown up to light grey, sometimes nail holes, places repaired with old wood
4C colour shade – brown, light brown up to light grey
1A colour shade – light brown, light grey, beige

Warning: Distinctive and striking appearance of wood, colour differences, damage, nail holes, cracks caused by drying and woodworm holes are tolerable with NOVATOP ALTHOLZ three-layer panels.

Structured surface

Types of surface: fine and coarse brushing, chopping (Quality sample book)
Wood: spruce
Standard thicknesses (mm): 14, 16, 19, 21, 27, 32, 42, 50, 60
Standard formats (mm): up to 2.100 x 6.000, minimum length of 1.000 mm

Examples of application

Manufacture of furniture and interior equipment, cladding of walls and ceilings.

Machining possibilities